Tech Tip: Hand Grip Removal

Every now and them I find out that something little I am doing that can save someone a lot of time and even better, frustration. I think this is one of those tricks: using alcohol to remove and replace bike handgrips.

I have heard others use hair dryers, heat guns, hairspray, liquid glue, and other concoctions when dealing with grips but they all have their tradeoffs. Alcohol does not seem to have a negative. It makes getting grips off easy, it makes putting grips on easy. So here is the way it works:

You will need rubbing alcohol of course and a screwdriver or thin stick such as a chopstick or bamboo shish kabob skewer. First insert the stick deep in between the grip and handlebar. Then pour a little into the gap. Now grab the grip and start twisting (with the stick still in). It will be a little difficult at first but will quickly become easy as the alcohol works its way around.

Insert a stick/screwdriver and pour in some alcohol

Now start twisting.

Installation: a little alcohol on the handlebar and inside grip will allow it to go on easily. If you don't get enough on then the grip will only go on half way. Don't worry, just use the removal method above (a screwdriver and more liquid) and it will slip right on.

Another good thing about this stuff, is it does a great job of cleaning oil off the handlebars. This means the grips will not slip around... once everything dries. But it will take a little while for the alcohol to evaporate. So if the grip is loose, give it an hour or two.

Happy wrenching!